Cedar Tubs Direct

When you find a leak in your hot tub, spa owners without the whole cavity filled with spray foam will spot and fix any kind of leak easily. This is where you need professional help with your hot tub plumbing parts in Canada.

To fix a hot tub leak, you need to find the exact leak area, get parts on hand to fix the leak with good, quick-drying PVC glue, and do the work of cutting out any existing or broken pieces and glue in new, replacement hot tub plumbing parts.

If you want to get the glue PVC connection done, you need to apply the glue by using the dabber in a circular motion around the glue joint multiple times quickly for heat buildup. It helps in heating the PVC connection which ensures a solid bonding. When you apply the glue rapidly in a circular motion at least ten times, it will provide you with ample coverage and make the joint warm.

You need to plug it together by twisting slightly and hold for a few seconds like the repaired joint sets. You may want it to hold for around 30 seconds to make a good bond. You can use a PVC cleaner or primer first on the joint which will be glued. But it’s not necessary if the glue is applied perfectly. Make sure that connections are clean and dirt-free.

You may need handy tools like hose cutters or a hack saw to cut the open pieces of pipe and hose, sandpaper, or other smoothing equipment to eliminate frayed edges at the cut area. Other tools may include the PVC hot tub glue, hot tub plumbing parts, and accessibility to the leak area.

Moreover, you can prevent leaks by keeping your hot tub water maintained. Avoid any remaining water while leaving the hot tub outdoor during winter. Otherwise, it can result in manifold and plumbing cracks to handle in the spring. Hopefully, your hot tub will never require plumbing system repair; but if you do, you should buy hot tub plumbing parts in Canada.

Generally, hot tub plumbing comprises pipes, hoses, and connectors for routing water from the spa pump to the jets and back. The circular path starts at the suction intakes present in the footwell of the hot tub.

When the pump operates, it creates suction at the front part of the pump, connected to the suction intakes. This is protected by a screen or is made up of little holes to get rid of any large size objects into the hot tub plumbing system.

The pump motor spins the internal shaft which turns on the impeller, a little wheel present inside the pump which helps in moving water. The discharge area of the pump helps in expelling water and projects it towards the jets through the manifolds, the plumbing parts with large input and smaller outputs so that the water pressure is distributed evenly throughout the jets.

The glue joints hold the plumbing parts together. Some clips may lighter hoses together, but the PVC glue is very robust and is an industry-standard. Usually, the blue glue is used to bond the PVC parts instantly within a matter of a few seconds.

Do you want to know more about hot tub plumbing parts in Canada? If yes, then you should look no further than Northern Lights Cedar Tubs Direct. For more information, please visit our website today at https://www.cedartubsdirect.com/.