Cedar Tubs Direct

Do you own a hot tub at home? If yes, then you must be familiar with hot tub spa chemicals required for proper hot tub care and maintenance. However, maintaining your hot tub and spa water properly balanced is significant to keep it clean and pathogen-free.

As a spa and hot tub owners, you might find it difficult to control the hot tub chemical balance. Check out the below discussed hot tub chemicals that you should consider buying for hot tub and spa.

1. NLCT- Cal-Rise

Are you looking to increase the calcium level of your spa or hot tub? If yes, then you should look no further than NLCT- Cal-Rise. It’s approved to be used in wooden tubs and all kinds of spas and hot tubs. This calcium increaser will increase the calcium hardness in hot tub water.

The Cal-Rise is fully soluble in water which means you can use your spa or hot tub immediately after application. It’s compatible with all sanitizers like bromine, biguanide, and chlorine. You should use Cal-Rise to increase calcium level and prevent foaming in your spa.

However, low calcium levels (soft water) can result in metal parts corrosion in your spa. Soft water is responsible for failing heating elements early. Hence, it’s better to check water levels regularly and make sure that hot tub has right levels of calcium hardness.

2. NLCT- NATURE PUR

Are you looking to remove spa waste materials effectively? You should consider using NLCT- NATURE PUR. It is approved to be used in wooden tubs and all types of spas as well as hot tubs. This is a safe, highly effective and eco-friendly solution for removal of sap waste materials.

Generally, NLCT- NATURE PUR helps in removing oils and grease that form the surface of spa water that can result in bath tub ring. This proven solution comprises of natural enzymes that eliminates oil and dirt particles. If used regularly, it will improve the overall efficiency of the filter. NATURE PUR is highly compatible with all sanitizers like bromine, chlorine, and biguanide.

If you really want to enjoy hot tubing safely, then getting healthy clear water is necessary. However, oils and grease are much lighter than water and generally float on the top of water. If you leave them untreated, they will cling to the side wall and result in an unsightly ring.

This is where NATURE PUR comes in handy. It will break down this oil and maintain the cleanliness of the surface. The same oils will minimize your filter efficiency. Over the time, oil particles clog up a filter and make the water system cloudy.

3. NLCT Alka-Rise

Are you concerned about how to increase the alkalinity level of hot tub water? Now you will do it through NLCT Alka-Rise. If the Total Alkalinity of your hot tub is reading low on a spa test, you should use an alkalinity enhancer in your spa.

NLCT Alka-Rise is specifically formulated for all hot tubs and spas including in any wooden hot tub. If you maintain the alkalinity level of your spa, it will prevent the changes in the pH levels of your spa water. It’s highly suggested to test the water levels in your hot tub regularly to maintain the proper levels of alkalinity.

 Bottom Line –

Want to learn more about hot tub chemicals? If yes, then don’t hesitate to contact Northern Lights Cedar Tubs Direct at 1-800-759-8990.